Noise Control
Soundproofing
Acoustical Enclosures
Acoustical Curtain Enclosures
Acoustical Foam Barriers
Acoustical Services
Noise Barriers
Acoustical Foam
Sound Absorbers
ArtUSA University
ArtUSA Gallery
Product Spec Sheets
|
ArtUSA Noise Control Products Inc.
We are noise pollution solution providers. By offering engineering, fabrication and installation of the absolute best noise reduction and noise control products available our company has set the bar in the soundproofing industry. Sound-proofing is our passion. We design, fabricate and install acoustical panels, acoustical insulation, sound barriers, acoustical wall panels, sound-barriers, noise barrier, sound enclosures, acoustic insulation, noise barriers, sound proofing and sound barriers.
| Noiseless Metal by ArtUSA |
|
We offer sheets and
custom solutions |
| (Noiseless Metal) is a
range of products for damping structure borne sound,
consisting of two metal facing sheets bonded by a
viscoelastic core. The sound damping qualities of
the viscoelastic core are temperature dependant. For
this reason the panels are supplied with cores
optimized for different temperature ranges,
depending on the applications in which they are to
be used.The two metal facing sheets in the panels
are usually cold rolled steel, (Often referred to as
Noiseless Steel) but in principle any type of metal
or alloy can be used, as can surface-treated sheet
of various kinds. The metal facing sheets are
ideally equal thickness, but a certain amount of
asymmetry can be tolerated with minimal loss of
acoustic properties. |
| Noiseless Metals serve a dual
purpose. It damps the resonant modes of the
structure borne sound and it replaces the sheet
material that would otherwise be used in the
construction of the component, without any increase
in thickness or weight. The acoustical deadness of
the panels is often sufficient to
replace the need for additional heavily loaded
polymer layers needed to screen the noise radiation
|
Key Benefits
- Replaces structural material and is
therefore virtually zero weight added
- Damping is designed into product
- Increase in sound transmission loss often
equal to addition of equal mass of barrier
material to mass of metal panel
|
|
|
