ArtUSA Noise Control Products Inc.
We are noise pollution solution providers. By offering engineering, fabrication and installation of the absolute best noise reduction and noise control products available our company has set the bar in the soundproofing industry. Sound-proofing is our passion. We design, fabricate and install acoustical panels, acoustical insulation, sound barriers, acoustical wall panels, sound-barriers, noise barrier, sound enclosures, acoustic insulation, noise barriers, sound proofing and sound barriers.

Call the experts at ArtUSA Noise Control Products, Inc... You’ve done everything you can to create a highly functional and aesthetic manufacturing environment. The enclosures you use should enhance rather than detract from your manufacturing facility. That’s why it makes sense to put ArtUSA on your team. At ArtUSA we’ve been specializing in the design and manufacturing of machine enclosures for over 25 years. We understand how to control noise, splash, mist, dirt, and other environmental factors. Our experience includes a variety of different applications such as screw machines, stamping presses, machining centers, grinding machines, lathes, and cut-off saws to name a few. So if you are a machine tool user, you can get the highest quality, best looking, custom designed enclosures from ArtUSA Industries, allowing you to concentrate your efforts on producing the highest quality products. For complete information and assistance, call today.

Options: STC Rated Panels up to 55 dBA Mylar, Polyethylene, or Fiberglass Cloth Lining Framed Cutouts/Openings Primer or Finish Paint Multiple Gauge Construction Multiple Materials Available Custom Designs Per Your Acoustical/Thermal Requirements Multiplet Insulation Materials and Densities Thermal Performance: Individual panels will have a “U” factor 0.07 and an entire panel enclosure will have a “U” Factor of 0.14 Fire Hazzard Rating: Standard acoustical fill will have the following UL Fire Hazard Ratings as per ASTM E-84: FLAME SPREAD -15 / FUEL CONTRIBUTED -O / SMOKE DEVELOPED -0

Acoustical Performance* - Standard Construction: *All acoustical tests were performed and reported by an independent Accredited Acoustical Laboratory. Copies of the test reports can be furnished upon request. Sound Transmission Loss (ASTM E90-81)   Octave Band Center Frequency(Hz) 125 250 500 1000 2000 4000 STC 4” Panel (TL in dB) 22 29 40 48 54 60 41 2” Panel (TL in dB) 21 24 35 43 52 57 37

Sound Absorbtion Coefficients (ANSI/ASTM C243-81 and E795) Octave Band Center Frequency(Hz) 125 250 500 1000 2000 4000 STC 4” Panel (TL in dB) .86 1.09 1.22 1.06 1.05 1.04 1.10 2” Panel (TL in dB) .31 .82 1.19 1.12 1.07 1.06 1.11

The solution for heavier or more customized applications. Self framing or FQF structures with panelized components offer a wide variety of access and hardware options.

A modular building is a pre-engineered structure that is flexible enough to satisfy most requirements... tougher than standard drywall construction, expandable, relocatable and re-usable.

 The solution for heavier or more customized applications. Self framing or FQF structures with panelized components offer a wide variety of access and hardware options.

1. Pre-Engineered
Minimize the costs of an architect or engineer, because our modular buildings are pre-engineered. Each unit contains complete CAD drawings and details, installation instructions and a bill of materials. If you should require engineering calculations and sealed drawings, ArtUSA can also supply them for your project. Our buildings can be designed to meet most building codes.

2. Ease of Coordination
Standard construction requires the need for contractors and sub-contractors, which increase the number of trades involved. Coordinating and scheduling of these multiple contractors takes more of your time. With an ArtUSA modular building, one phone call covers everything. We supply a pre-engineered building, and handle the installation - or help your maintenance staff do the job. ArtUSA can handle the entire construction project for you.

3. Appearance
With standard pre-fabricated components, ArtUSA can ensure a consistent, high quality appearance with every installation. Each system integrates with the others to provide a clean and professional look.

4. Quick Installation
A standard 12 x 16 inplant office can be assembled in two days, compared to standard construction, which can take several weeks - especially when dealing with design permits or multiple contractors. Plant disruptions are reduced to a minimum.  The cost savings are significant.

5. Less Mess
With ArtUSA's pre-engineered panels there is often no need to seal off areas to protect against dust and the mess associated with paint, mortar, spackle, tape, etc. Only normal detailed cleaning of equipment afterwards. Eliminating these related costs means very substantial savings for modular construction.

6. Low Maintenance
ArtUSA wall panels feature a Galvanized coating that maintain their appearance for years. There is no need for painting and repair associated with standard construction. Also, while conventional construction can warp because of high humidity levels or moisture, ArtUSA modular walls can be designed to withstand variations in environmental conditions. So, whether you are using your enclosure in a manufacturing facility or office environment, the walls will perform for many years, with no deterioration.

7. Durability
Industrial plant offices built using the conventional method utilize wood or metal studs and painted drywall, leaving an empty cavity that can be easily damaged or punctured. ArtUSA panels fill that void and feature durable metal surfaces. This solid, reinforced wall construction resists damage from direct impact.

8. Adaptability
The greatest demand on business today is the ability to react to change - rapid growth, downsizing, or new directions. With modular buildings, if additional space is needed, or the original configuration is not as practical as planned, space layouts can be modified to meet the changing needs.
ArtUSA wall panels, doors, and window panels are all interchangeable. You can add a second story, attach a mezzanine, or expand laterally. Your design options are almost endless.

9. Better Acoustics
Just putting up four walls won't solve the need for a quiet place to work - especially in plants with loud machinery or forklift traffic. An office built of standard construction is useless if it is not designed properly to reduce contaminating noise levels. ArtUSA Fire & Sound panels provide a logical solution to noise control. In the design of our modular buildings we evaluate all connections and openings to ensure the building will meet your specifications for effective sound control.

We manufacture and or, package, sell, install - Sound Enclosures - Equipment Enclosures - Personnel Enclosure - Barrier Walls -Thermal Enclosures - Audiometric Testing Rooms - Punch Press Enclosure - Test Cells - Clean Rooms - Diesel Generator & Positive Displacement Enclosures - Fiberglass Enclosure - In-plant Space - Curtain Enclosures - Acoustical Pipe and Duct Lagging - Sanitary Panels and Baffles - Portable Screens - Damping Compound - Industrial Ceiling Baffles - Class 1 Fire Rated Foams - Polyurethane Foams - Fiber-Free - Adhesive Backed - Facings and Barriers - SONEX - Sound Seal - Acoustical Curtains - Acoustical Foam - Rectangular Silencers - Round Silencers - Elbow Silencers - Dust Collectors - Fume Oxidizers - Oil Mist Collectors - Smoke Capture - Work Stations - Isolation Mounts - Pads - Levelers Architectural Noise Control / Noise Abatement - Fabric and decorative foam panels - Baffles - Deflectors - Curtains - Banners Dosimeters - Calibrators - real Time Analyzers - Software - Active Noise Canceling Muffs  - Noiseless Metals