Noise Control
Soundproofing
Acoustical Enclosures
Acoustical Curtain Enclosures
Acoustical Foam Barriers
Acoustical Services
Noise Barriers
Acoustical Foam
Sound Absorbers
ArtUSA University
ArtUSA Gallery
Product Spec Sheets
|
ArtUSA Noise Control Products Inc.
We are noise pollution solution providers. By offering engineering, fabrication and installation of the absolute best noise reduction and noise control products available our company has set the bar in the soundproofing industry. Sound-proofing is our passion. We design, fabricate and install acoustical panels, acoustical insulation, sound barriers, acoustical wall panels, sound-barriers, noise barrier, sound enclosures, acoustic insulation, noise barriers, sound proofing and sound barriers.
| ArtUSA Acousti-Pyramid Panels Noise and Sound
Control Absorbing Foam |
 |
Applications:
- Displays, showrooms
and museums
- Machine rooms or
manufacturing areas
- Modern offices and
building interiors
- Recreational
facilities
- Recording studios
and listening rooms
- Restaurants and
cafeterias
- Clubs, bars and restaurants
|
Features:
- Bold, geometric
pattern
- Seamless
installation with AcouSTIC™ adhesive
- Excellent acoustic
control
- Panel size of
24”x24” in 2”, 3”, 4”
or 6” thickness
|
Details:
ArtUSA Acousti-Pyramid™
Panels offer outstanding acoustic control across
all frequencies with Noise Reduction Coefficients
(NRCs) ranging from 0.75 to 1.05. The unique
geometric design of these panels dramatically
increases the panels' surface area, providing much
more acoustic control than flat surfaces. ArtUSA
Acousti-Pyramid Panels are made from ArtUSA
Industires’ willtec® foam, which is
Class 1 fire-rated according to ASTM E 84 for flame
spread and smoke density. Willtec natural also meets
the corner burn test UL 1715. ArtUSA
Acousti-Pyramid Panels, available in either
natural or painted willtec, can be easily mounted to
any wall or ceiling surface with AcouSTIC™
water-based adhesive. Once installed, the
2’x2’ panels come together to make an
attractive, seamless pattern. |
 |
 |
 |
ArtUSA’s
Acousti-Pyramid™
Panels used in an office building |
Willtec foam meets
Class 1 fire resistance rating |
Acousti-Pyramid™
Panels
used in a manufacturing facility |
|
Installation:
- Make
sure both the panels, and the surface to which the
panels are being applied, are free of dust and dirt.
If adhering to a
 metal surface, use a
de-greaser.
- Apply
a line of adhesive around the perimeter of the panel
approximately 1” from the edge.
- Apply
a line of adhesive from opposite corners through the
center of the panel, creating an
“X”.
- Press
panel into place and hold for 5 seconds. Then pull
panel away to allow adhesive to become tacky. Lastly,
press the panel back into position and hold
again for 5 seconds.
- Press
panel into place and hold for 5 seconds. Then pull
panel away to allow adhesive to become tacky. Lastly,
press the panel
- Wear
clean cotton/canvas gloves for
installation.
- Use
a sharp razor or fixed-blade knife and a metal
straight edge to cut panels. For best results, cut
panels on flat side.
- Overhead
installations may require additional adhesive and
mechanical support to ensure a strong enough
bond.
|
|
| Physical Data – Willtec: |
Material |
Open-cell melamine-based
foam |
Density |
0.5 to 0.7 lbs./cubic Ft. (ASTM
D3574-77) |
Long Term Service
Temperature |
302 degrees F |
Fire Resistance |
Class 1 per ASTM E 84 (all
finishes) Meets UL 1715 (willtec natural) |
Flame Spread per ASTM E 84 |
Natural: 5 / Painted: 10 |
Smoke Density per ASTM E 84 |
Natural: 50 / Painted: 10 |
Microbial Growth |
Passes UL 181, section 11 |
Fungus Resistance |
Rating #0 per ASTM G21 |
Finishes |
Natural (white), Painted |
|
|
| Finish |
Thickness |
|
Coefficients per
ASTM C423-90A |
|
|
125Hz |
250Hz |
500Hz |
1KHz |
2KHz |
4KHz |
NRC |
Mount Type |
| Natural (White) |
2” |
0.07 |
0.25 |
0.6 |
0.94 |
0.97 |
1.08 |
0.7 |
B |
|
3” |
0.09 |
0.37 |
0.81 |
1.01 |
1.03 |
1.07 |
0.8 |
B |
| 4” |
0.18 |
0.44 |
0.96 |
1.14 |
1.18 |
1.19 |
0.95 |
B |
| 6” |
0.16 |
0.62 |
1.1 |
1.2 |
1.21 |
1.22 |
1.05 |
B |
| Painted |
2” 3”
4” 6” |
NA |
NA |
NA |
NA |
NA |
NA |
NA |
B |
{Charcoal, Beige,
Brown,
Blue, Light Gray} |
|
|
We
manufacture or package, sell, and install - Sound
Enclosures - Equipment Enclosures - Personnel Enclosure
- Barrier Walls -Thermal Enclosures - Audiometric
Testing Rooms - Punch Press Enclosure - Test Cells -
Clean Rooms - Diesel Generator & Positive Displacement
Enclosures - Fiberglass Enclosure - In-plant Space -
Curtain Enclosures - Acoustical Pipe and Duct Lagging -
Sanitary Panels and Baffles - Portable Screens - Damping
Compound - Industrial Ceiling Baffles - Class 1 Fire
Rated Foams - Polyurethane Foams - Fiber-Free - Adhesive
Backed - Facings and Barriers - SONEX - Sound Seal -
Acoustical Curtains - Acoustical Foam - Rectangular
Silencers - Round Silencers - Elbow Silencers - Dust
Collectors - Fume Oxidizers - Oil Mist Collectors -
Smoke Capture - Work Stations - Isolation Mounts - Pads
- Levelers Architectural Noise Control / Noise Abatement
- Fabric and Decorative Foam Panels - Baffles -
Deflectors - Curtains - Banners Dosimeters - Calibrators
- Real Time Analyzers - Software - Active Noise
Canceling Muffs - Noiseless Metals
|
|
